Description

This is a device to be used with a motor analyzer to measure how your motor would work in real world conditions (like when its on the track). New updated case design with multi-color accents that is printed flush, and comes with a resistor bank base!

Please note that we recommend using the same turn slave motor or the next higher turn (if wanting to test a 21.5 motor use a 25.5 or 21.5 motor). This is only rated for use with 25.5, 21.5, 17.5 and 13.5 motors, it is not recommended for use with any lower turn motors. If you would like to use a lower turn motor with these please message us.
An additional note. Some 13.5 in operation with the tunalyzer and the load master, causes too many amps to be pulled and cannot be used together. We have not found this issue with the motolyser.

Performance chart: Click here to download file this is the chart used in the videos on how to use their load master.

Features & Specifications:

Designed for 540 motors
Plugs into any analyzer
Color coded wires to identify A, B and C poles
Vented sides
9" motor wires and 275mm sensor wire included
Resistor bank and coupler
Rated for up to 140* Fahreinheit
Handcrafted in the USA!
Comes with protective box

Includes:

1, dual motor stand
1, coupler (to attach the test motor to the slave motor)
1, 3 input resistor bank (to simulate a load)
1, base for resistor bank
1, protective zip case
1, 275mm sensor wire

Needed to use:

Motor analyzer
Test motor
Slave motor

Please note if you would like a different color base than load master, you must order them seperately. If you order a base with the load master it will be the same color.

Check out their Initial video below, as well as their tips video. Additional videos located on their Youtube Channel.