Tired of charge leads breaking? We are too! These offer superior protection for all of your charging needs!
Designed to be used with DRC connectors, but they will work standard 4mm connectors as well.
Features:
- Chemical and temperature resistant
- Made out of a proprietary material (NOT PLA)
- Designed to be easy to plug in and remove
- Secure bond for use over time
- 18 months of research and development
Notes:
These are designed to be use with fully protected leads, but can be used with charge leads without sheathing at the connectors. Please use 12 awg size if your charge leads do not have sheathing down to the connectors. Designed to be used with a single wire. If you are using these on the battery side with 2 wires, please select the 10 awg size.
How to use:
Make sure your wires are soldered within the solder area. Test fit before applying heat shrink. Apply heat shrink with heat gun or lighter. Let the heat shrink cool, and test fit the protector again. Slide the protector down, and generously apply glue over connector, and heat shrink. Slide protector up, and twist. If needed add more glue from the wire end.
What's included:
4 4mm positive protectors w/ red adhesive heat shrink
4 4mm negative protectors w/ black adhesive heat shrink
Check out how to apply them:
